CONFIGURE MOXA DE311 OR Nport 5110/EU V2.0


1. Install the IP adaptor configuration software on a PC connected to the net

for each IP antenna/adaptor

2. Connect the IP adaptor to the Ethernet.

3. Choose an IP address which is part of the network and is not currently being used

- submit/ Save/Restart

4. With the configuration program, configure the adaptor to use the chosen IP

- submit/ Save/Restart

5. Configure Operating setting/Operationmode/Mode as

- TCP_SERVER_MODE

- Max Connection 3

- Local TCP Port 45678

6. On "More Settings" configure:

- Force Transmit Timeout to 1ms

- Port as 45678

-submit/ Save/Restart

7. On Serial Settings Configure:

- Baud Rate a 38400/115200

(in acordance to the antenna's configurationguraçãothe value can also be 19200)

- If 433Mhz without repeaters - 115200 Baud Rate

- If 433Mhz with repeaters - 38400 Baud Rate

- If 868Mhz 38400 Baud Rate

- Flow Control: None

- submit / Save/Restart

 

8. On the PC in the folder c:\X64\config.ini,

 

pdfCONFIGURE MOXA NPort 5110/EU V2.0            CONFIGURAÇÃO CONFIG.INI.PTCONFIGURAÇÃO DO CONFIG.INI - PT

 

On the PC in the folder c:\X64\config.ini,

(edit with a text editor, then change all parameters in green, respect all the in red, according to your needs)

 

<BASEDIRECTORY>c:/x64/bin_base/</BASEDIRECTORY>

<REPEATERDIRECTORY>c:/x64/bin_repeater/</REPEATERDIRECTORY>

<ONLINEPROGRAMDIRECTORY>c:/x64/bin/</ONLINEPROGRAMDIRECTORY>

<OFFLINEPROGRAMDIRECTORY>c:/x64/bin_offline/</OFFLINEPROGRAMDIRECTORY>

<BASE_PROGRAM1>

 

 <BASE1>

<ALLOWSENDPROGRAMS>YES</ALLOWSENDPROGRAMS>

 <ANTENNAALLOWKILLPROGRAMS>YES</ANTENNAALLOWKILLPROGRAMS>

 <TERMINALALLOWKILLPROGRAMS>YES</TERMINALALLOWKILLPROGRAMS>

 <GREATER_DISTANCE_SMALL_SPEED>NO</GREATER_DISTANCE_SMALL_SPEED>

 

<TCPIP>192.168.1.90</TCPIP>

<BASENAME>BAS00</BASENAME>

<TERMINAL1>DEFAULT_</TERMINAL1>

<TCPIP_PORT>45678</TCPIP_PORT>

</BASE1>

 

<BASE2>

<ALLOWSENDPROGRAMS>NO</ALLOWSENDPROGRAMS>

<ANTENNAALLOWKILLPROGRAMS>NO</ANTENNAALLOWKILLPROGRAMS>

<TERMINALALLOWKILLPROGRAMS>NO</TERMINALALLOWKILLPROGRAMS>

 <GREATER_DISTANCE_SMALL_SPEED>NO</GREATER_DISTANCE_SMALL_SPEED>

 

<TCPIP>192.168.1.91</TCPIP>

<BASENAME>BAS10</BASENAME>

<TERMINAL1>DEFAULT_</TERMINAL1>

<TCPIP_PORT>45678</TCPIP_PORT>

</BASE2>

 

<BASE3>

<ALLOWSENDPROGRAMS>NO</ALLOWSENDPROGRAMS>

<ANTENNAALLOWKILLPROGRAMS>NO</ANTENNAALLOWKILLPROGRAMS>

<TERMINALALLOWKILLPROGRAMS>NO</TERMINALALLOWKILLPROGRAMS>

<GREATER_DISTANCE_SMALL_SPEED>NO</GREATER_DISTANCE_SMALL_SPEED>

 

<TCPIP>192.168.1.92</TCPIP>

<BASENAME>BAS20</BASENAME>

<TERMINAL1>DEFAULT_</TERMINAL1>

<TCPIP_PORT>45678</TCPIP_PORT>

</BASE3>

 

</BASE_PROGRAM1>


<TERMINAL_PROGRAM1>

 <FINDBASE>YES</FINDBASE>

<NUMBEROFBASES>20</NUMBEROFBASES> 

<RESETTIME>0</RESETTIME> 

 <POWERDOWN>180</POWERDOWN>  

<FIRST>BAS00 01</FIRST><LAST>BAS00 97</LAST> 

<PASSWORD></PASSWORD> 

 <LASERCONFIG1>QM</LASERCONFIG1>

<AUTOID>YES</AUTOID> 

</TERMINAL_PROGRAM1>

 


<TERMINAL1>

 <TERMINALID>BAS00 01</TERMINALID>

<TEXT>Sample</TEXT>

 <LASERCONFIG1>QM</LASERCONFIG1>

 <PASSWORD></PASSWORD> </TERMINAL1>

</TERMINAL_PROGRAM1>

<DEBUG>NO</DEBUG>

</TERMINAL1>

 


<OPEN_GPRS_PORT>NO</OPEN_GPRS_PORT>

<OFFLINE_NEGOCIATE_BEST_BAUDRATE>YES</OFFLINE_NEGOCIATE_BEST_BAUDRATE>

<TESTEMULATOR>YES</TESTEMULATOR>

<EMULATOR_TCPIP_PORT>4953</EMULATOR_TCPIP_PORT>

<HANDSHAKE>NO</HANDSHAKE>

<PC_NAME>AS400SYS</PC_NAME>

<DELAY_BETWEEN_SENDING_BLOCKS>30</DELAY_BETWEEN_SENDING_BLOCKS>

<ZIPSCREEN>YES</ZIPSCREEN>

<STOP_ON_TCPIP_ERROR>YES</STOP_ON_TCPIP_ERROR>